FEATURES
Support GPS L1/L2/L5, BeiDou B1/B2/B3, GLONASS L1/L2, Galileo E1/E5a/E5b/E6/AltBOC, QZSS L1/L2/L5, Navic L5, SBAS
Compact Design
Hot Swap Battery
User-friendly Interfac
RELIABLE IN THE FIELD
SinoGNSS S100 GNSS receiver is a compact RTK GNSS receiver tracking all working constellations, which performs well with each constellation independently. With SinoGNSS QUANTUMTM technology and its strong anti-interference design, the S100 will provide available and reliable high-accuracy positioning no matter where you are.
RUGGED AND EASE OF USE
The rugged housing with IP67 Dustproof & Waterproof design makes the S100 perfectly and effectively work even in harsh environments. Small volume with less than 1kg weight makes the S100 one of the most portable GNSS receivers meeting your RTK survey demands. Bulit-in 8GB internal memory enlarges your data storage in the field.
INTEGRATED GNSS RECEIVER
The S100 GNSS receiver combines a GNSS board, Bluetooth® and adjustable TX & RX UHF into one compact device, which is one of the most reliable choices for any surveying tasks. Built-in GPRS/ GSM/4G modem ensures the S100 seamlessly work with all kinds of CORS.
SMART BATTERY DESIGN
With two hot swap batteries, the S100 helps to extend working hours and ensure your fluent workflow in the field. The battery LEDs flash when battery shortage. Moreover, you will benefit from its consumer-grade battery design, compatible with Canon LP-E6, which is easy to purchase and replace in your local market.
SPECIFICATIONS
Signal Tracking
GPS: L1C/A, L2C, L2P, L5
BeiDou: B1I, B2I, B3I, B1C, B2a, B2b
GLONASS: L1, L2
Galileo: E1, E5a, E5b, E6, AltBOC
QZSS: L1C/A, L1C, L2C, L5
Navic: L5
SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM, BDSBAS
Environmental
Operating temperature: -40 °C to + 65 °C
Storage temperature: -40 °C to + 85 °C
Humidity: 100% non-condensing
Waterproof and dustproof:
IP67,protected from temporary immersion to depth of 1 m
Shock: Designed to Survive a 2 m drop onto concrete
Software
Survey Master Android-based data collection software
Carlson SurvCE field data collection software (optional)
MicroSurvey FieldGenius field data collection software (optional)
Data Format
Correction data I/O : RTCM SC104 Version 2.x, 3.x formats, CMR(GPS only),CMR+(GPS only)
Position data output : ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK ComNav Binary update to 20 Hz
Electrical and Memory
Input voltage: 7-28 VDC
Power consumption: 1.92 W*4
Li-ion battery capacity: 2 × 2000 mAh up to 10 hours typically
Memory: 8 GB5
Performance Specifications
Cold start: <50 s
Warm start: <30 s
Hot start: <15 s
Initialization time: <10 s
Signal re-acquisition: <1.5 s
Initialization reliability: >99.9%
Communications
1 Serial port (7 pin Lemo) Baud rates up to 921,600 bps
UHF modem1 : Tx/Rx with full frequency range from 410-470 MHz2 Transmit power: 0.5-2 W adjustable
Range: 1-5 km3
4G modem
4G Bands:
800/900/1800/2100/2600 MHz 3G Bands: 900/2100 MHz
2G Bands: 900/1800 MHz
Support GSM, Point to Point/Points and NTRIP
Position data output rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz
5 LEDs (indicating Power, Satellite Tracking, GPRS Status and Differential Data)
Bluetooth® : V 4.0 protocol, compatible with Windows OS and Android OS
Positioning Specifications
Static and Fast Static: 2.5 mm + 0.5 ppm Horizontal 5 mm + 0.5 ppm Vertical
Long Observations Static: 3mm + 0.1 ppm Horizontal 3.5 mm + 0.4 ppm Vertical
Real Time Kinematic: 8mm + 0.1 ppm Horizontal 3.5 mm + 0.4 ppm Vertical
DGPS: <0.4 m RMS
SBAS: 1 m 3D RMS
Standalone: 1.5m 3D RMS
​
Physical
Size(L × W × H): 15.8 cm × 7.5 cm
Weight: 0.95 kg with two batteries